Disclosure : This site contains affiliate links to products. We may receive a commission for purchases made through these links.
Theben thePiccola S360-100 DE motion sensor, white

Passive infrared motion detector thePiccola S360-100 DE for installation in the ceiling With a detection angle of 360°, thePiccola S360-100 DE passive infrared motion detector covers a detection area of approx. 50 m² at a radius of 8 m. It enables automatic, presence and brightness dependent lighting control. The ceiling opening should have a diameter of 34 to 36 mm. The detector is operated fully automatically, is preset and therefore immediately ready for operation. A test mode is possible to check the function and detection range. The following remote controls are suitable for controlling the detector: User remote control the Senda S, Service remote control theSenda P, App remote control the Senda B. They must be ordered separately if required (see Accessories). – Mounting height: 2 to 6 m – Brightness adjustment range: 5 to 1,000 Lux – brightness switching value adjustable, teach-in function – Pulse function for staircase lighting time switch – Light run-on time adjustable: (pulse 0.5 s), 30 s to 30 min – Mixed light measurement suitable for fluorescent lamps (F/PL/ESL), halogen/ incandescent lamps and LEDs – Incandescent/halogen lamp load: 2,000 W – Fluorescent lamp load (VVG) not compensated: 2,000 VA – Fluorescent lamp load (VVG) parallel compensated: 1.300 VA 140 µF – Fluorescent lamp load (VVG) series-compensated: 2,000 VA – Fluorescent lamp load (EVG): 1,200 W – LED lamp 2 W: 600 W – Channel A Light: relay, 230 V – Extension of the detection range by master/slave circuit – Ambient temperature: – 20 °C to + 50 °C – Protection class IP44 (sensor), IP20 (power section)