Category Archives: Electronic Gadgets
LED power supply 12W, 12V
LED power supply 12W, 12V Independent, short-circuit resistant transformer, which can be mounted on materials for which the combustion properties are known.
SLV LED power supply 20 W, 24 V
LED power supply 20 W, 24 V Independent, short-circuit resistant transformer, which can be installed on materials where the combustion properties are known.
SLV LED POWER SUPPLY 100 W 24 V
LED power supply unit, 24 DC – 100 W LED power supply unit with 24 V constant voltage and a power of 0-100 Watt. – 2 outputs – Temperature protection: 110 °C
SLV transformer 12 V AC 150 VA
12V low voltage transformer with screw terminal connection This transformer is an electronic 12V low voltage transformer with screw terminal connection. It is a short-circuit-proof safety control gear and can be installed outside of luminaires. (independent converter) – Output: 50-150 watts – 50 Hz
SLV LED power supply 12 V DC/12 W round
Round LED power supply unit for installation in a switch box This LED power supply unit is designed for installation in a 12 V constant voltage switch box with a maximum output power of 12 watts. – suitable for installation in switch boxes with a diameter of 6 cm
SLV LED power supply 12 V DC/20 W round
LED power supply unit 12 V/0-20 W This LED power supply has a 12 V constant voltage and a power of 0-20 W. – 230 V – 50 Hz
LED power supply 24 V DC/12 W round for switch box
LED power supply unit with 24 V/ 12 W – 24 V constant voltage – maximum output power of 12 W – incl. 12.5 cm primary and 14.5 cm secondary cable – suitable for installation in switch boxes with a diameter of 6 cm
SLV LED power supply 24 V DC/150 W round
LED power supply unit with 24 V constant voltage The LED power supply unit is supplied including cable gland. – Power: 0-150 W
Paulmann MaxLED power supply 230/24 V max. 36 W
Transformer for LED strips MaxLED, max. 36 W This power supply unit is required when expanding a MaxLED set operated with 24 V to a total output of max. 36 W. – including supply cable with mains plug (IP20), output cable and 5-pin plug
SLV connection box 5-pin IP68
5-pin connection box for outdoor use This connection box is suitable for 5-pin cables with a diameter between 8 and 17 mm. With protection class IP86 especially suitable for outdoor use.
Paulmann MaxLED power supply 150VA/24V max. 150W
Transformer for LED strips MaxLED, max. 150 W This power supply unit is required when expanding a MaxLED set operated with 24 V to a total output of max. 150 W. – including supply cable with mains plug (IP20), output cable and 5-pin plug
SLV connection box 4-cable IP68 Ø 7.2 cm
4-fold connection box for outside – reusable This connection box can be used for all cable installations outdoors and also underground. It is resistant to earth acid and rot. – suitable for cables with a diameter of 5-14 mm – designed for screwing – can be installed without special tools – maximum voltage: 1.000 V
HID-AspiraVision Compact ballast MW 35-70W
HID-AspiraVision Compact 35 – 70W /I CDM MultiWatt ballast – PHILIPS The MultiWatt ballast AspiraVision Compact is the new and innovative electronic ballast from Philips for CDM bulbs. Through the innovative switch function, which allows for the setting of the driver to three different bulb wattages, the highest degree of flexibility is achieved and this
SLV T-connector box, IP68
T-connector box for outside The T-connector box with protection class IP68 is suitable for outdoor use. Three cables with a diameter between 6 and 11 mm can be connected. – Voltage max. 500 V – Current load max. 17.5 mA
For strip system Max LED – flex connector 10 cm
10 cm long: Max LED flex connector The Max LED flex connector for the strip system of the same name can be used to level uneven areas, to extend or to bridge. With a plug system for easy installation. – 5-pole
Flex connector 100 cm for Max LED strip
Flex connector for Max LED strip: 100 cm long This connection cable can be used to bridge short distances and to level uneven surfaces when using the Max LED strip system. It is also suitable for use in tight radii or for changing the level. – easy installation with plug system – 5-pole for 24
Corner connector for Max LED strip
Max LED corner connector – max. 144 W The set of four corner connectors for the Max LED strip system also contains eight plug connectors. As such, the strips can be easily adapted for levels and corners, and also shortened. – colour: white – easy installation with plug system
VDE Disc transformer 35-105 W 230/12 V 105 VA
Transformer for 12 V luminaires – dimmer compatible This VDE-certified transformer converts the mains voltage of 230 V into the operating voltage required for 12 V low-voltage luminaires. The output of the downstream luminaires may be up to 105 W. Dimmable lamps can be operated via this transformer with dimmers R,L,C.
